Harvester for cleaning water bodies of algae and floating debris Aquamarine H5-200

Harvester for cleaning water bodies of algae and floating debris Aquamarine H5-200

Сollects all kinds of algae and floating debris from the water surface and up to a depth of 1.5 m

Works in fresh and sea water

Aquamarine is a pioneer in the field of water purification technology from algae and the production of floating harvesters for their collecting.

Aquamarine has been used for more than 40 years to collect algae and debris from the water surface. Aquamarine designs and manufactures a wide range of equipment, which includes: harvesters, skimmers, transport barges, shore conveyors and reporters. The equipment is designed to remove algae, including Cladophora aegagropila, widespread on the Black Sea coast and floating debris from the coastal sea surface, and also the surface of reservoirs, rivers and lakes.

Aquamarine equipment is operated in more than 30 countries around the world.

Technical characteristics:

Dimensions (working)Length — 10,08 m

Width (rowing wheels on the sides) — 3,53m

Width (paddle wheels behind the stern) — 2,59 m

Height from the waterline – 2,13 m (without roof)

WeightCurb weight — 3091 kg, carrying capacity — 1360 kg
Power plantPetrol engine Subaru air-cooled, power — 25 hp

Fuel capacity — 49 l,

Hydraulic pump — piston pump Danfoss, hydraulic tank — 85 l

Housingunderwater part — stainless steel float, thickness 2 mm, divided into 5 compartments

Size: (L*W*H) 5,8*2,3*0,58 m

Draught: empty 27 cm, loaded 39 cm

Lower body protection (+ 5 cm to draught) — Stainless steel sleds

Rowing wheelsDouble rowing wheels with a diameter of 1,22 m with hydraulic drive

Control – proportional electronic control. Rotation of rowing wheels — provides sideways movement, reversal on the spot, rotation of the stern

Pickup deviceWidth – 1,5 m, depth – 1,7 m

Horizontal/Vertical knives — 76 mm, reciprocating movement

Conveyor and torch drive — hydraulic motors

Damping – swing rotary suspension system

Conveyor – standard galvanized steel mesh

Hopper and unloading system
Two-stage conveyor with hinged unloading section

Width of conveyor frame — 1,1 m, overhang — 1,8 m

The unloading height (above deck) is 1,2 m, the average unloading time is 1 minute

Conveyor type – standard galvanized steel mesh

Conveyor drive — hydraulic motor


  • Diesel engine
  • High pressure washer
  • Stainless steel conveyor mesh
  • 280 l aluminum chipboard
  • LED lights
  • Rowing wheel positioning drive
  • Optional set for collection of floating debris, large debris, seaweed sifting
  • Awning over the bridge
  • Light cabin
  • Automatic lubrication system
  • Manual lubrication system
  • Mesh bag for packing assembled algae
  • Closed floor under the front and rear UHMWPE conveyors