Hinged cylindrical brush Нolms SL with hydraulic drive

Hinged cylindrical brush Нolms SL with hydraulic drive

Small, smart and agile

Holms SL is a hinged cylindrical brush with hydraulic drive, for front or rear mounting on tractors and small loaders. The unique balancing system eliminates support wheels, which make it difficult to operate at speed. The balancing system ensures optimal pressure of the brush and follow the profile of the cleaned surface. You get the best results and minimal wear.

Using our brush, you can work at higher speeds and more efficiently than with equipment of other manufacturers. The brush shaft is rotated by 2 direct drive motors located inside the axis. The hydraulic system is designed with regard to the hydraulics of the carriers, which guarantees excellent compatibility. Durability and reliability, maintenance-free axle support, as well as well-established and time-proven manufacturing technology, significantly reduce operating costs.

Holms SL mounted brushes are available in 3 widths. The standard package includes: hydraulic hoses with quick connections, parking racks, plastic reflector, mounting system for carriers (three-point anchorage or standard type fastening hooks), height/tilt indicators, brush rotation. Mechanical, hydraulic or electro-hydraulic regulation is possible, allowing you to change the angle of rotation on the go. An irrigation system with a water tank capacity of 400 and 600 liters is offered as an additional equipment. Irrigation system (on/off) and electro-hydraulic rotation are controlled from the cabin using Holms universal cable. The optimal configuration is selected depending on the width of the carrier’s track, the parameters of its hydraulic system (flow), and where the equipment is to be used.

Technical specification:

Hinged cylindrical brush HOLMS SL2.02.22.5
Working width at full turn 30° (m)1.71.92.2
Weight excluding hooks (kg)390410430
Maximum width (m)2.22.42.7
Weight with filled tank 400 l water tank (kg)945965985
Brush diameter0.70.70.7
Oil flow, min/max. (l/min)40/13040/13040/130

Optional equipment and accessories:

  • Irrigation system with water tank capacity of 400 or 600 liters
  • Holms lifting function — lift to transport position by means of hydraulics for carriers without lifting mechanism (trucks)
  • Connecting device — for connection/disconnection of equipment. Holms hydraulic lift function is required
  • Manual tilt mounting for carriers with non-tilt mounting system (trucks)
  • Lateral displacement — complete set for the brushes to the right/left by + / – 0.7 m using hydraulics
  • Additional pile kit — for quick replacement of the brush
  • Radio control of irrigation and rotation of the brush